Scroll down
  • Climate
    Possibility to select the desired zone of your own house.
  • Climate
    By clicking on the corresponding icon you can access to Temperature Control function.
  • Climate
    The operating mode needs to be changed, now in “Standby” mode.
  • Climate
    The user selects the desired operating mode, e.g. “Comfort”.
  • Climate
    The delégo App interface communicates the setpoint change and changes color until the setpoint is reached (heating mode).
  • Climate
    The user would like to change the fan or fan-coil speed, now in “Speed 1”.
  • Climate
    The user selects “Speed 3” from the App’s dropdown menu.
  • Climate
    Through the App interface, the user can verify setpoint (in this case, “Standby”), actual temperature, fan speed and operation mode (in this case “Cooling”).
  • Climate
    By a simple click you can directly access the relative humidity control page.
  • Climate
    On the relative humidity control page, the user can manage the humidity of the air by interacting with the humidifier even in dehumidifier mode.
  • Climate
    By clicking on the bottom of the Clima function page, the user accesses the Meteo page.
  • Climate
    Through the METEO interface you can see values such as wind speed, outdoor temperature, etc...
delégo, thanks to its simple and intuitive interface, allows the user to manage the temperature control of the house zones.

Temperature and relative humidity parameters can be controlled and managed, and integrated scenes can be created, along with other customized options for the system activation, control and deactivation.

With delégo, time schedule programs can be activated for temperature control, according to the user’s needs, thanks to 4 available setpoint types: Comfort, Standby, Economy and Protection.
Available control types
  • Basic control: you can increase or decrease the desired temperature according to your own needs and comfort sensations.
  • Control with operating modes and time scheduling: you can activate a time schedule or manually select a comfort level.
  • Fan-coil control: you can manually select a fan speed or activate automatic mode.
  • Relative humidity control: through this measure and its management, you can handle the air humidity by interacting with the humidifier, also in dehumidification mode.
  • Meteo data page: Through the interface, you can view the values of a KNX Meteo station installed in the system, to have environmental measures under control, which can also be used in pre-programmed scenes.
Importing from ETS
Easy importing of ETS projects with ekinex® products thanks to self-acknowledgement function. Guided configuration with third-party products.
Changing an existing chronoprogram
This folder, accessible both with admin and user profile, allows to define through a graphic control the weekly profile of each chronoprogram according to the selected (heating or cooling) conduction mode. The minimum time resolution is 0.5 hours. The graphic screen allows to easily perform the following operations:

  • Copy a daily profile on other weekdays or on the whole week
  • Copy an entire chronoprogram on other programs or on all configured chronoprograms

Web server interface folder Tab Chrono - Programs


Fields and icons of the Programs folder

Chronothermostats
It allows to select a chronoprogram among those defined in the Chronothermostats folder. In order to activate the graphic page in Heating mode (7) and in Cooling mode (8) it is necessary to select a choice in the checkbox 1 and simultaneously a choice in the checkbox 4.

2 >> Copy on >>
Button that copies the entire weekly profile. This button is not active if no selection has been made in box 3. When the entire chronoprogram has been copied, the system notifies the success of the operation with a notification message.

Combobox
It allows to select a chronoprogram among those defined in the Chronothermostats folder, as destination of the copy procedure. By selecting all chronothermostats, the chronoprogram selected in 1 is copied to all defined chronoprograms.

4 Week day
It allows to select a day of the week for the chronoprogram selected in box 1. If both boxes 1 and 4 are selected, the corresponding graph is activated.

5 >> Copy on >>
Button that copies the selected daily profile on other weekdays. This button is not active if no selection has been made in box 6. When the entire chronoprogram has been copied, the system notifies the success of the operation with a notification message.

Combobox
It allows to select a day of the week, as destination of the copy procedure. By selecting all week, the daily chronoprogram selected in 4 is copied to all days of the week.

7 Graph with time profile in heating conduction mode

Intuitive graph with all programmed attenuations throughout the day in heating mode. By selecting a sector with the left mouse button, it is possible to move the graph to the desired attenuation level. The time resolution between consecutive attenuation changes is 0.5 hours. After having modified the profile, it is necessary to confirm with the SAVE button in the lower right side of the page.

8 Graph with time profile in cooling conduction mode

Intuitive graph with all programmed attenuations throughout the day in cooling mode. By selecting a sector with the left mouse button, it is possible to move the graph to the desired attenuation level. The time resolution between consecutive attenuation changes is 0.5 hours. After having modified the profile, it is necessary to confirm with the SAVE button in the lower right side of the page.

INFO
The chronoprograms are sent on the bus to all temperature controllers thanks to 1-byte communication objects with the following semantic value: [20.102] DPT HVAC Mode 1 Byte
AUTO COMFORT STAND-BY
0000 0001 0010

ECONOMY PROTECTION
0011 0100

INFO
The delégo server, once the configuration is complete, send the chronoprogram to all configured and associated devices. In order to minimize the traffic on the bus, the automatic or manual status of each regulator is queried periodically and, if necessary, the corresponding HVAC mode is sent.

In case a new device (properly addressed and configured) is electrically connected on the bus, it will inherit the operating mode forced by the delégo chronoprogram.
Video tutorial
This website or its third party tools use cookies, which are necessary to its functioning and required to achieve the purposes illustrated in the cookie policy. If you want to know more or withdraw your consent to all or some of the cookies, please refer to the cookie policy. By closing this banner, scrolling this page, clicking a link or continuing to browse otherwise, you agree to the use of cookies..